Precision Crossed Roller Slides
ADC's high precision linear slides provide the an accurate and rigid platform for use in any positioning system. The rugged black anodized aluminum housing features a precision ground base and top plate, each with multiple utility holes for easy integration into the users' system. The stage is driven by a high class preloaded ballscrew coupled to a high torque 200 step per revolution stepper motor which can be run in full, half, or microstepping mode to meet your resolution requirements. Maximum rigidity is assured through the use of preloaded crossed roller linear bearings. Each slide also features two fully adjustable, normally closed limit switches to define the extents of travel.
|
* Loading conditions are not simultaneous. ** Ballnuts are preloaded to 0,1*C *** Overall width for DS200 = A + 8mm; Overall width for DS200 with encoder = A + 8mm + 16mm **** Overall width for DS100 with encoder = A + 13.6mm Mounting plates and brackets are available. See page 1-20 For connector and pin out information see page 3-33 |
Ordering Information
|
Slides can be ordered with or without encoder, in air or 10-4 torr. When ordering options be sure to add the proper designation to each part number.
For example: |
English
Deutsch
Français
Español
Chinese
Korean
Russian