Precision Tilt Stages (Goniometer)

ADC’s tilt stages provide a rigid, accurate motion for general goniometric use. Each stage is stepper motor driven and curvaliner bearing guided stages with a rugged anodized aluminum body. The top and bottom mounting surfaces are precision ground to provide an optimal interface.

The TS-300 and TS-400 stages use a tangent bar type mechanism to facilitate the rotary motion. A stepper motor driven linear actuator interfaces to the stage through a limited rotation flexure style bearing. This interface results in a highly resolved, very rigid rotary motion. The stage is guided by preloaded ball type profiled linear rails. An optional optical encoder gives closed loop feedback for the device.

The TS-90, TS-110, and TS-160 use curved crossed roller bearings for the highest possible rigidity and profiled trajectory. The drive mechansim is a precision ground worm wheel segment and stepper motor driven worm.

# Contact ADC for details

* Contact ADC for encoder options

** Values are approximate since the drive mechanism is a tangent bar

For connector and pin out information click here.

Ordering Information

Option	Add
With Encoder	-1
Without Encoder	-0
Air	-A
10^-4 torr	-10

Slides can be ordered with or without encoder, in air or 10^-4 torr. When ordering options be sure to add the proper designation to each part number.

For example:
To order a TS160 with an encoder and air, the part number would be TS160-1-A.

Downloadable CAD Files

	300	400
TS	TS-300.zip	TS-400.zip

Downloadable CAD Files

	90	110	160
TS	Contact ADC	Contact ADC	Contact ADC

CAD files are available for all of our products. If you would like a CAD file and it is not available for the product you are interested in, please contact us.