About ADC
video introduction
~2.50 min. long
REFERENCES
ISO Cert
Motion Systems » Engineered Systems » Seven Axis High Load Precision Motion System
Seven Axis High Load Precision Motion System

The following summarizes notes in regards to the above motion system:

1. The common rotation point from the goniometers is located 270 mm above the surface of the top plate.

 2. The maximum load is 600 kg.

3. One manual translation stage of 300 mm support the whole assembly. The translation has adjustable move stoppers with dampers. It allows the whole assembly with 1000 kg to be maneuvered by only one person with an accuracy of 1 mm. The translation is mechanically fixed to the floor with 4 adjustable feet, each allowing a 30 mm vertical course.

4. All the elements are non-magnetic With the exception of certain components that might not be 100% non-magnetic. These components include ball screws, bearing, motors, etc.

5. All the geared elements are coded in absolute.

6. All the stages have rulers to manually read the position value.

7. Encoders are from Renishaw. http://www.renishaw.com/en/

 This is a high load and high precision system that can be used in wide areas of Neutron and Synchrotron experimental stations

News